Pachycephalosaurian Ver.40
Pachycephalosaurus 1:20 Scale Model
Complete Model Series1:20
Print Time
48-96 hours
Component Count
25one
Support Requirements
Need
File format
STL, OBJ, 3MF
Model Description
The robust dome-shaped skull may have been used in mating contests. Product ID 450, ideal for museum education, collection display, and diorama construction.
Key Features
- Thickened head cap
- Bumpy decoration
- bipedal locomotion
- Herbivorous
Recommended Print Materials
PLAresin
📋 Printing Guide
Print Settings Recommendations
- • Layer Height: 0.2mm (PLA) / 0.15mm (Resin)
- • Fill rate: 15-20% (structural components: 25%)
- • Wall thickness: 1.2mm (3 layers)
- • Print temperature: Adjust according to material
Assembly Instructions
- • Bond using model glue or UV resin
- • Sand the seams for a smooth surface
- • Dry assembly can be performed first to verify fitment
- • Refer to the included assembly diagram
Post-processing recommendations
- Handle supports with care when removing.
- • Sand with 400-800 grit sandpaper
- • Spray primer for enhanced adhesion
- • Acrylics or model paints recommended for coloring
Notes
- • For first-time printing, use a small test size
- • Caution: Large parts may detach from the heated bed
- • Increase support density for slender components
- • Ensure proper ventilation and protective gear when using resin printing