Fast-Install Exhibition Systems for Seasonal Attractions

The window is the requirement

Seasonal attractions are judged by how fast they go up and come down. Design starts from the installation window, not from the ideal layout. If the venue gives three days, the system must be installable in two.

Modular framing and pre-wiring

Frames that bolt together in repeated patterns install faster than custom structures. Cables should be pre-terminated and labelled at the workshop, with plugs instead of field splicing. Every hour spent on site is the most expensive hour in the project.

Standardise the tooling

One bolt size and one spade connector beat a kit full of special tools. Standard fittings reduce training, reduce lost parts and let a temporary crew work productively on day one.

Design the removal too

Removal is usually under more time pressure than installation. Plan the reverse sequence, the crate order and the storage layout before opening. A show that packs in the same order it was installed comes down cleanly.

Labour plan, not heroics

Estimate crew size from the actual task list, then add a realistic margin. Seasonal builds fail when the plan assumes everyone works at peak speed for twelve hours. Good systems let an average crew finish on schedule.

DinoCG builds seasonal units with modular frames, pre-terminated wiring and a documented install and removal sequence, so short windows stay achievable.

Chinese Version

窗口就是需求

季节型展项的成败看装得快不快、拆得快不快。设计要从安装窗口倒退，而不是从理想布局出发。如果场馆只给三天，系统就必须两天能装完。

模块化框架与预接线

按重复模式螺栓连接的框架，比定制结构装得更快。线缆应在工厂完成端接并贴好标签，到场用插头而不是现场接线。现场花的每一小时都是项目里最贵的一小时。

统一工具

一种螺栓规格加一种插簧接头，胜过一箱专用工具。统一配件能减少培训、减少丢件，让临时组建的班组第一天就能干活。

拆卸也要设计

拆卸的时间压力通常比安装更大。开幕前就要规划逆向顺序、木箱编号和仓储布局。按安装顺序反向打包的展项，才能干净利落地撤场。

靠计划，不靠拼命

根据实际任务清单估算人数，再加合理余量。季节展项出问题，往往是因为计划假设所有人能连续十二小时保持峰值速度。好的系统能让普通班组按计划完工。

DinoCG 的季节型装置采用模块化框架、预端接线缆，并附安装与拆卸顺序文档，让短窗口仍然可完成。