ZGDino
AI and edge computing

The next generation of animatronic dinosaursPowered by AI and edge computing

Zigong craftsmanship combined with real-time computer vision, ASR voice interaction, and biomimetic actuation.

AI-powered animatronic dinosaur head with camera and sensor hardware
Dual-cameraMicrophone arrayServo jaw

A looping prop, or an exhibit that provides answers

A traditional animatronic repeats the same motion on a timer. Visitors watch a cycle, take a photo, and move on—the exhibit cannot respond to the person standing in front of it.

The Smart Series retains the frame, skin, and sculptural work, then adds an edge computer that sees, listens, and responds. Overseas buyers get the academic realism of a museum piece along with interactive features they can demonstrate on the floor.

Existing build
Steel frame, silicone skin, servo-driven motion
+
Layer added
Raspberry Pi 5 edge computer running the interaction stack
=
Result
A dinosaur that sees visitors, hears their questions, and answers them.

Three systems, one response

Detection, conversation, and jaw movement share a single session, so the response arrives with a matching gaze and mouth movement.

Visitor standing in front of an AI animatronic dinosaur exhibit
Vision and tracking

Tracks the speaker

Dual cameras detect faces in the frame, and the head tracks along both horizontal and vertical axes.

It hears the question.

An ASR-enabled microphone array sends requests to an AI conversation layer, preserving context for follow-up questions.

Its mouth stays open.

A dedicated servo channel drives the jaw using speech output, so the mouth opens and closes in sync with the response instead of repeating a fixed loop.

Vision and tracking

Dual USB and CSI cameras with face detection turn the head toward the visitor.

Voice call

A microphone array with speech recognition powers an AI conversation layer to deliver answers to questions.

Biomimetic lip synchronization

Servo channels synchronize the jaw with speech output, making the mouth look natural while talking.

Edge control box with circuit boards and servo wiring

Build-in Hardware

The control stack resides within the model body, connected to the existing frame and skin. The same architecture supports head mechanics, jaw synchronization, and the camera and audio front end.

Main computer
Raspberry Pi 5 running the interaction stack at the edge
Servo control
PCA9685 driver board featuring a multi-channel SG90 and high-torque servo array for head and jaw axes
Audio
Omnidirectional microphone array and full-range speaker
Vision
Dual HD capture units on USB and CSI
Safety and compliance
The control box and flame-retardant material specifications comply with UL and CE standards for international venues; certification scope is confirmed per project.

One dashboard for the venue team

Configuration and monitoring are performed via the local web interface. This same interface serves as the foundation for future upgrades, allowing venues to add sensors, motor channels, or language packs without rebuilding the controller.

Managed via the venue network; no client installation required.
How DinoAi's control system works
  • Remote device configuration and behavior logic setup
  • Live camera preview from the management page
  • Audio files, voice packs, and playback settings
  • Wi-Fi and network diagnostics
  • Expand sensors and motors for future upgrades

Expansion ports and motor channels are reserved for second-stage customization: behavior sequences, additional language packs, and multi-camera setups.

Axes and interfaces at a glance

Head yaw, head pitch, and jaw operate on separate channels with travel limits defined per model. Sensor inputs and spare motor channels are reserved for future scenes and triggers.

View the integration whitepaper
AxisMotionAvailability
Head yawTurns left and right to follow the visitorStandard travel set per model
Head tiltNods up and down to match the visitor's height.Standard travel set per model
JawOpens and closes with speech outputStandard, powered by a dedicated channel
Eyelids and neck tiltExpression, accents, and body leanPer model, when the shell permits

Where the smart series works

Each venue has its own character rules and language pack, configured before the exhibit opens.

Museums and science centers

An interactive exhibit that answers questions about its species, positioned next to the specimen label.

Theme Parks & Family Entertainment Centers

A walkway attraction that detects visitors, tracks them with its head, and initiates conversation.

Commercial events and touring shows

A compact interactive installation for mall activations and pop-up exhibitions that draws crowds without a narrator.

Buyer questions about the Smart series

What the AI layer provides, what runs on the controller, and what to verify before placing an overseas order.

A life-size animatronic dinosaur with an edge computer embedded in its body. It features dual-camera vision tracking, AI-powered speech recognition and conversation, and servo-driven jaw movement—all while maintaining the frame, skin, and sculpting of a standard animatronic build.

A traditional model repeats a motion loop on a timer and cannot respond to the viewer. The Smart Series detects visitors, turns its head toward them, listens to questions, and responds with synchronized jaw movements.

A Raspberry Pi 5 mounted inside the model runs the interaction stack. No separate development workstation is needed at the venue; configuration is managed via the local web interface.

Dual USB and CSI cameras feed a face detection model that locates visitors in the frame. The head then tracks the detected person along horizontal and vertical axes, so the model always faces whoever is speaking to it.

An omnidirectional microphone array captures speech, automatic speech recognition converts it to text, and an AI conversation layer generates the response via the built-in speaker. Follow-up questions maintain context within a session.

Yes. A dedicated servo channel drives the jaw using the speech output, so the mouth opens and closes in sync with the response rather than running a fixed loop. A PCA9685 driver board coordinates the jaw and head axes.

Use the local web dashboard to configure devices, view camera previews, manage audio and voice packs, define behavior logic, and run network diagnostics. Expansion ports and motor channels are reserved for future customization, such as new behavior sequences or multi-camera setups.

The control box and flame-retardant materials comply with UL and CE standards for export installations. Certification scope varies by project; please request market-specific documentation before ordering.

The unit operates its own interaction stack and is not provided as a DMX-native fixture. For venues that cue exhibits from a show-control system, the interface and command set are reviewed per project; the agreed option is included in the build quote.

Daily management is performed on the venue network via the local dashboard. Monitoring or integration beyond that network is scoped per project and not included by default.

Behavior sequences, voice packs, and audio playlists are configured in the dashboard. Custom motion programming for the head axes and jaw is developed with the animatronics team as part of your order.

The head and jaw are driven via multiple servo channels using the PCA9685 driver. The exact number of axes varies by species and head size; the axis mapping is finalized during the design phase.

Detection in the standard build is camera-based. Additional triggers, such as proximity sensors or floor buttons, are project-specific; required inputs are confirmed prior to production.

Download the technical specification sheet

Tell us the species, size, and venue. We'll send you the control architecture, servo layout, and floor options.